VMS-3
Manual
8
Revised
08/2010
4) Carefully remove the quartz sleeve from the chamber. As you first pull the
sleeve, support the far end with your finger so that it does not drop to the bottom
of the chamber as it starts moving
5) Once removed, clean the quartz sleeve with alcohol or a detergent. Stubborn
stains can often be removed with a dilute solution of hydrochloric acid.
Follow all manufacturers’ instructions and precautions when handling
cleaners and chemicals.
6) Reassemble in the reverse order. While inserting, keep the quartz sleeve
parallel to the chamber, and as it nears the far end support with your finger.
Make sure the quartz sleeve protrudes an equal distance at each end. Be sure
that the O-rings are placed on the sleeve before the Teflon washer.
Tighten the static gland nuts firmly by hand only. Using hands tools can
easily break the quartz sleeve.
7) Prior to installing the lamp, connect the water supply and check for leaks. When
any leaks have been remedied, then install the lamp and connect the power
supply.
Germicidal ultraviolet rays are harmful to eyes and skin. Do not restore
power until lamp and end caps have been completely reinstalled.
WARNING
CAUTION
WARNING
