Swan Neck Liquid-Cooled neck liners.
•
Unscrew and remove the Swan neck assembly
from the torch.
•
Remove the old neck liner and replace with the
new liner .
•
Replacement liners are supplied cut to length and
ground to 40 degrees. They do not need adjustment
and can be used straight from the package.
•
Refit the liner and nipple to the swan neck and
reassemble the swan neck to the torch tightening the
retaining nut to 2.5Nm.
Swan Neck Air-Cooled neck liners.
•
Unscrew and remove the swan neck assembly
from the torch
•
Unscrew the moulded neck liner nipple .
This will withdraw the neck liner from the neck.
•
Unscrew the old neck liner from the moulded liner
nipple .
It is a conventional right-hand thread and will
easily unscrew.
•
Replace the new neck liner by screwing it into the
nipple through approximately
2
to
3
turns.
•
Refit the liner and nipple to the swan neck and
reassemble the swan neck to the torch tightening the
moulded nut retaining to 2.5Nm.
Typical Pull-Mig wiring diagram.
Appendix “A”
Moulded Nipple
Neck Liner
Retaining Nut
Torch Neck
COMPLETE NECK LINER
RETAINING NUT
TORCH NECK
Complete Neck Liner
Retaining Nut
Torch Neck
7
3
1
4
1
1
1
2
3
1
1
3
4
2
1
1
2
2
3
3
4
Summary of Contents for Suregrip Pull-Mig Series
Page 1: ...Suregrip Pull Mig Series OWNER S HANDBOOK ...
Page 9: ......
