Pro Display 10
Installation
246,4 ±0,5
165 ±0,5
R2 ±0,5 (4x)
Panel cutout dimensions
Ordering Part numbers:
RAM 1” Mount Kit (incl. 2 bases, a double socket arm, screws and washers)
65RAM1KIT
Panel Assembly
Torque 2,7 Nm
Pro Display 10 can be assembled to vehicle dashboard, to separate panel in vehicle cabin, or for
example to cabinet door in installations where exists separate electrification cabinet. Currently Pro
Display 10 has no dedicated panel mounting kits available due to the fact that the panel thickness
can vary depending on assembly surface and customer needs.
CAUTION
The torque recommendation need to
be followed.
Mounting Methods
I
Mounting with RAM Ball Mount
Mounting with RAM ball allows adjustment of the
display’s position and angle.
To fasten the RAM 2,5” round plate, use 4 x M4
screws of class 8.8 or higher. It is preferred to use
Hex Socket Cap Screw ISO 4762 / DIN 912 or Pan
Head Torx Machine Screw ISO 14583 TX / DIN 7985
type.
Torque 2,7 Nm
4 pcs:
Screw M4
Washer M4
1” RAM ball base
(RAM-B-202)
1” RAM double socket
arm (RAM-B-201)
1” RAM ball base
(RAM-B-202)
Pro Display 10 has two alternative mounting methods: panel mounting or swivel mount (RAM
mount).
Mount the device on to a smooth and flat surface. Device fastening to an uneven surface will stress
the enclosure or damage the outer flange. Fastening on a rough or uneven surface will affect the
sealing.
Follow the guidelines found from the
Pro Display 10 Instruction Book (doc. MSG17-4020IB-UK),
in
such case that Pro Display 10 will be mounted to panel or dashboard.
CAUTION
The mounting points are blind holes
with a maximum thread depth of 7,5
mm. Longer screws may damage the
device when tightened.
