background image

4

5

 

Read instructions carefully before operating this product.

 

Keep bystanders away.

 

This product is for outdoor use only.

 

Ensure the engine is stopped before carrying out  

 

  adjustments, cleaning or maintenance.

 

Always turn off the engine and water supply when  

 

  finished.

 

Do not use the product if found to be damaged.

 

Only use with detergents specified by the manufacturer.  

  Other chemicals may compromise the safety of the  

 

 product.

 

Do not direct the pressure jet towards mechanical parts  

  containing lubricant grease.

 

Clean vehicle tyres from a minimum of 50cm to avoid     

  damage by the high pressure jet.

 

Do not point high pressure jets at people, animals, live   

  electrical parts or the product itself.

 

Do not use accessories such as hoses and connections  

  that are not advised by the manufacturer.

 

Engage the high pressure safety catch located on the    

  gun when not in use.

 

Do not step/stand on the high pressure hose.

 

Ensure the nozzle is securely attached before using the  

 

Do not attempt to modify the product in any way.

 

To ensure good operating condition arrange regular   

  servicing from an authorising agent. 

 

Only use replacement parts supplied by the manufacturer

 

Only use fresh,clean and good quality fuel in the engine.

 

Never operate the engine without oil.

 

Never refuel in close proximity to naked flames, sparks or    

  other sources of ignition e.g. cigarettes.

 

Do not refuel when the engine is hot.

 

Wipe up and correctly dispose of any fuel spillage    

  immediately with a suitable medium.

 

Move away from the refuelling areas before restarting the    

  engine. Store fuel for short periods only in a suitable  

 

  container away from heat and direct sunlight.

 

Clean the pressure washer thoroughly after each use.

 

Regularly check external nuts and fixings to ensure vibration  

  caused by normal use has not begun loosen them. Remove   

 

the spark plug ignition lead from the back of the spark plug   

  and position the lead to avoid accidental reconnection.

 

Store the machine in a secure dry location out of reach of    

 children. 

 

Empty the fuel tank before storage.

  product. High pressure can cause it to be fired from the  

  lance with considerable force, and could cause injury   

 damage.

 

Be ready for the kick-back force and the sudden torque  

  on the spray assembly when operating the trigger.

 

A high pressure jet can remove paint and other surface  

  finish. It can also damage tarmac and grouting.

 

Switch off completely when not attended.

 

The hose is designed specifically for operation with    

  high  pressures. Take care to avoid damage that may    

  prevent correct operation of the product.

 

This product is not to be used by children or anyone    

  with reduced capabilities.

 

Always completely unwind the high pressure hose prior  

  to operation.

 

Make sure that the machine is switched off before  

 

  unwinding the high pressure hose, and take care not to  

  pull the machine over.

 

Do not let the high pressure hose contact the hot  

 

  engine exhaust. 

 

Do not use this product indoors.

 

Keep exhaust emissions away from air intakes.

GENERAL SAFETY INSTRUCTIONS

MAINTENANCE AND STORAGE

 

   

    

 

Read the 

Manual

Wear eye 

protection

Wear 

gloves

Summary of Contents for PPPW2900


















Reviews: