10
11
GREEN LED
RED LED
1. Plug the charger into a mains socket - when switched on
the charger LED will display a green light.
2. Slide the battery into the charger - the charger LED will
display a steady red light to show that the battery is
charging.
3. When the battery is fully charged a green light will show -
allow battery to cool before using.
4. Replace the charged battery in the drill sliding in until se-
cured by the latch.
BATTERY CHARGER
BATTERY
USING THE IMPACT DRIVER
1. Ensure that you have read, understood and comply with all the safety instructions in this manual.
2. Firstly ensure the direction switch is in the mid (lock) position.
3. Pull quick release guide sleeve upwards.
4. Insert the required bit into the hexagonal hole.
5. Release guide sleeve so it returns to it’s original position.
6. Select the direction of rotation with the forward/reverse selector.
7. Depress speed control trigger.
8. The LED work light will come on whenever the trigger is depressed.
9. When finished, remove the bit and clean the driver.
10. Store in a cool, dry place out of reach of children.
