Truss Rod Adjustment
If you're unfamiliar with adjusting a truss rod, we STRONGLY suggest
that you have this adjustment made by a qualified guitar technician.
The truss rod adjuster wheel is easily accessible. To adjust the truss
rod, use the steel rod capstan wrench supplied with your guitar. Rotate
the wheel towards the high E string to tighten the truss rod and
towards the low E string to loosen it.
NOTE: Over tightening WILL result in damaging the truss rod.
Vibrato Bar Rotation Adjustment
To set the rotation tension of the vibrato bar (or to prevent the bar
from falling out), adjust the Allen screw, located on the rear of the
vibrato bar socket, using the smaller 1.5mm Allen wrench supplied
with the guitar.
To do this:
Insert the vibrato bar into the socket and push down so
that the back of the bridge lifts, allowing better access to the screw
with the Allen wrench. Adjust the screw to the preferred tension.
LIMITED WARRANTY
There is a 1-year limited warranty beginning on the date of first
customer purchase on all unmodified and properly cared for Parker
Guitars.
Any Parker Guitar found to be defective within the 1-year warranty
period set forth above will be repaired or replaced at the option of
Parker Guitars provided the guitar is promptly delivered (freight and
insurance prepaid) directly to Parker Guitars for service.
Please contact Parker's Product Support office at (978) 988-0102 for
information, return authorization, and a Parker Work Order Number.
Please visit the Parker Guitars website at www.parkerguitars.com for
more detailed warranty information.
Warranty Repairs Outside the U.S.
For warranty repairs outside the U.S. please contact either the dealer
from whom you purchased the guitar, or the Authorized Parker
Distributor in your country for information and assistance.
6-10-02
P
A R K E R
G
U I T A R S
P.O. B
O X
388 W
I L M I N G T O N
MA 01887 USA 978.988.0102 F
A X
978.988.8807 www.parkerguitars.com
N
O
T
H
I
N
G
P
L
A
Y
S
L
I
K
E
A
P
A
R
K
E
R
®
