User Information Guide
6
WWW.PARKERMOTION.COM
PH: (724)
-
861
-
8200
Unpacking
Carefully remove the positioner from the shipping container and inspect the unit for any evidence of shipping
damage. Report any damage immediately to your local authorized distributor. Please save the shipping contain-
er for damage inspection or future transportation.
Incorrect handling of the positioner may adversely affect the performance of the unit in its application. Standard
handling and lifting practices should be employed, product may be heavy.
Please observe the following guidelines for handling and mounting of your new positioner
.
Proper mounting of the actuator is required to reduce risk of injury and provide optimal performance.
Positioners should be mounted to a flat, stable surface by using thru
-
holes on the base of the unit.
Unless otherwise noted, motors should always be mounted in accordance to the motor
manufacturers specifications.
Unless otherwise specified, the standard installation of the rotary stage is horizontal,
DO NOT allow the positioner to drop onto the mounting surface. Dropping the positioner can generate impact
loads that may result in flat spots on bearing surfaces or misalignment of drive components.
DO NOT drill holes into the positioner. Drilling holes into the positioner can generate particles and machining forc-
es that may effect the operation of the positioner. Parker will drill holes if necessary; contact your local authorized
distributor.
DO NOT subject the unit to impact loads such as hammering, riveting, etc. Impacts loads generated by hammer-
ing or riveting may result in flat spots on bearing surfaces or misalignment of drive components.
DO NOT lift the positioner by cables or cable management system. Lifting positioner by cables or cable manage-
ment system may effect electrical connections and/or cable management assembly. The unit should be lifted by
the base structure only.
DO NOT expose positioner to mist, spray or submersion in liquids.
DO NOT disassemble positioner. Unauthorized adjustments may alter the positioner
’
s specifications and void the
product warranty.
