Parker KarryFlare, Operating Manual

Page: 22 / 26

KARRYFLARE - Operating Manual
9
8. Pressure Chart: KARRYFLARE/CHART
9. Transport

For transportation the oil refill screw must to be closed (clockwise rotation)
and the hand lever has to be locked.

The cover protects the device. Lock cover for transport.

Use handle on side for carrying.

For trolley transport, the telescopic tube handle on the machine front must be
completely pulled out.
.
10. Trouble Shooting
Problem Probable cause Suggested solution
The device slips when
tube is pressed against
the tube stop
Placed on a slippery surface Place the device on a non-slip
surface. If flaring large dimensions
place the device in front of a fixture
so that it cannot slide backwards.
Oil leaks out Oil refill screw not closed Always close the oil refill screw during
transportation.
No cylinder movement Valve on handpump not closed Tighten the hand wheel at the pump.
No cylinder movement Not enough oil in the handpump Check oil level and refill, if necessary.
The cylinder does not
return to the home
position
Valve on handpump is closed Open hand wheel at the pump
completely.
Flaring dies get stuck in
flaring block
Friction between dies and flaring
block is to high
Lubricate sliding surfaces between
dies and flaring block.
Scratches in Tube-ID and
flare area
Worn or dirty flaring pin Check flaring pin on wear and
damages and replace if necessary.
Surface faults in Tube-ID
and flare area
Flaring pin not clean Always keep flaring pin clean and
lubricated. Take care, that tubes are
deburred well and no chips are
placed on the flaring pin.