5
What do I need to do to get started with remote diagnostics?
3 Quick start guide
Instruction book, IQAN- G3
3
Quick start guide
What do I need to do to get started with remote
diagnostics?
Hardware
•
IQAN-G3 modem hardware from Parker.
•
Use the built in SIM card or SIM-card from your preferred supplier.
•
CAN card for PC if own sim card is used.
Software setup/configuration steps
•
Add IQAN-G2 to the application file. IQAN-G2/G3 modules have the same func-
tionality.
•
Configure the modem in IQANrun if own SIM card is used.
•
Account on the Proemion server needs to be registered.
•
Activate the modem on the server.
•
Built in SIM card needs to be activated on Proemion web portal if used.
1. Add the G3 modem in your IQANdesign application by using the IQAN-G2
module.
IQAN-G3 communicates by using the CAN bus. In IQANdesign, all masters and the
modem need to be connected to the diagnostic bus.
Add IQAN-G3 modem in IQANdesign.
2. Configure the modem.
N
OTICE
Configuration of the modem is only necessary if the built in SIM card is not used.
•
Connect your PC CAN card directly to the IQAN-G3 CAN bus (diagnostic bus).
