5
What do I need to do to get started with remote diagnostics?
3 Quick start guide
Instruction book, IQAN- G2
3
Quick start guide
What do I need to do to get started with remote
diagnostics?
Hardware
•
IQAN-G2 modem hardware from Parker.
•
SIM-card from your preferred supplier.
•
CAN card for PC.
Software setup/configuration steps
•
Add IQAN-G2 to the application file.
•
Configure the modem in IQANrun.
•
Account on the Proemion server needs to be registered.
•
Activate the modem on the server.
1. Add the G2 modem in your IQANdesign application.
IQAN-G2 communicates by using the CAN bus. In IQANdesign 3.xx, all masters and
the modem need to be connected to the diagnostic bus (required for G2 modem, also
allows CAN bus-to-PC diagnostics).
Add IQAN-G2 modem in IQANdesign.
2. Configure the modem.
•
Connect your PC CAN card directly to the IQAN-G2 CAN bus (diagnostic bus).
Connect to the IQAN-G2 modem for configuring.
1 6
5 9
CAN-H
CAN-L
PC
IQAN-G2
USB
CAN
120 ohm
adapter
