Parker Hannifin Manufacturing (UK) Ltd
20
USA
Fluid connections
The icountBSplus Is fitted with venting ports on the rear panel and the unit is supplied with two
hoses (Vapor Release 4mm ACC6NW010 and Oil Drain 6mm ACC6NW009).
CAUTION: The correct connection method and safety standards should be applied
when fitting the icountBSplus vapor release and oil drain.
If there is any leakage of oil around the vapor release or oil drain please clean with an
appropriate lint free cloth and cleaning materials.
If you experience difficulty, contact Parker Hannifin Manufacturing (UK) Ltd for advice.
Connecting/Disconnecting
1
2
Locate hoses. Note that the colour of the hoses
supplied may vary.
Remove the blanking plugs by pressing down
on the connector sleeve and pull out the plug.
Store the plugs carefully and replace them once
testing is complete, to avoid leakage and external
contamination.
3
4
Connect the
VAPOR RELEASE
(Ø 4mm) hose.
Check that hose is firmly located
Connect
DRAIN
(Ø 6mm) hose.
Check that hose is firmly located.
5
Insert the 4mm and 6mm hose
into bottle.
To avoid spillage try to keep the bottle upright
when using the icountBSplus.
Summary of Contents for icountBSplus
