Parker ETH, Manual

Page: 16 / 28

Introduction ETH ATEX
16
192-550004N2 ETH ATEX November 2013
1.9 Terms of guarantee / warranty
These operating instructions are subject to changes including changes in technical
details with respect to the information and figures contained herein.
Parker Hannifin Manufacturing Germany GmbH & Co. KG grants no quality or
durability guarantees nor any guarantees as to the suitability for specific purposes.
Such guarantees must be expressly agreed upon in writing
Public statements, recommendations or advertising do not in any way represent
quality specifications.
The operator's warranty rights require that the operator immediately report any
defects and precisely describe said defects in the complaint. Parker Hannifin
Manufacturing Germany GmbH & Co. KG is not responsible under any
circumstances for damage to the product itself or any consequential damage
caused by the product resulting from improper handling of the product. If
Parker-Hannifin Manufacturing Germany GmbH & Co. KG is responsible for a
defect, Parker-Hannifin Manufacturing Germany GmbH & Co. KG shall be
authorized, at its discretion, to undertake improvements or deliver replacements.
In compliance with ISO 9000, all products are equipped with a type plate that is
connected to the device. The type plate must not be removed or damaged under
any circumstances.
Parker Hannifin Manufacturing Germany GmbH & Co. KG shall not be held liable,
regardless of any legal basis, except for cases of intent or gross negligence;
injuries to life, body or health; or defects of malicious nondisclosure or whose
absence was expressly guaranteed in writing.
Furthermore, if there is compulsory liability under the Product Liability legislation for
personal injury and property damage to privately used objects, in the event of
negligent breach of significant contractual obligations, Parker Hannifin
Manufacturing Germany GmbH & Co. KG shall also be liable for cases of ordinary
negligence; however, this is limited to damages that are contractually typical and
foreseeable.
Further claims are hereby excluded.
Failure to adhere to these operating instructions or the relevant statutory provisions
as well as any other information from the supplier shall invalidate the warranty.
In particular, we are not responsible for failures caused by modifications made by
the customer or other parties. In such cases, the normal repair costs will be
calculated. These costs will likewise be calculated for a check of the unit if no fault
can be determined on the unit.
This regulation also applies during the warranty period.
No claims exist as to the availability of previous versions or to the retrofitting
capacity of the units delivered to adapt them to the respectively current model
version.
User Conversions and Changes are Not Permitted
The linear actuator must not be changed in its design or in terms of safety without
our approval. Any change as defined here made by the user excludes any liability
on our part.