HY10-1632-M2.1/US
Parker Hannifin Corporation
Accumulator & Cooler Division
United States
Installation & Disassembly
Bladder Accumulators
7
Assembly & Disassembly
Figure 12:
Thread hex jam nut (Item 5) onto bladder
valve stem (Item 2). Secure valve stem from twisting
with an appropriate wrench applied to the valve
stem flats. Torque jam nut to proper torque based
on accumulator size per the Suggested Approximate
Torque Values on page 2 of this guide.
Figure 11:
Once the bladder valve stem has been pulled
through the valve stem opening in the shell, install the
valve stem hex nut (Item 5) by hand. Once the valve
stem hex nut is in place, remove the bladder pull rod.
Figure 11
Figure 12
