3
Important User Safety Information
It is important that motion control equipment is installed and operated in such a way that all applicable safety
requirements are met. It is your responsibility as an installer to ensure that you identify the relevant safety
standards and comply with them; failure to do so may result in damage to equipment and personal injury. In
particular, you should study the contents of this user guide carefully before installing or operating the equipment.
The installation, set up, test and maintenance procedures given in this user guide should only be carried out by
competent personnel trained in the installation of electronic equipment. Such personnel should be aware of the
potential electrical and mechanical hazards associated with mains-powered motion control equipment—please
see the safety warnings below. The individual or group having overall responsibility for this equipment must
ensure that operators are adequately trained.
Under no circumstances will the suppliers of the equipment be liable for any incidental, consequential or special
damages of any kind whatsoever, including but not limited to lost profits arising from or in any way connected with
the use of the equipment or this guide.
WARNING: High-performance motion control equipment is capable of producing rapid
movement and very high forces. Unexpected motion may occur especially
during the development of controller programs. KEEP WELL CLEAR of
any machinery driven by stepper or servo motors. Never touch any part of
the equipment while it is in operation. This product is sold as a motion
control component to be installed in a complete system using good
engineering practice. Care must be taken to ensure that the product is
installed and used in a safe manner according to local safety laws and
regulations. In particular, the product must be positioned such that no
part is accessible while power may be applied. This and other information
from Parker Hannifin Corporation, its subsidiaries, and authorized
distributors provides product or system options for further investigation
by users having technical expertise. Before you select or use any product
or system, it is important that you analyze all aspects of your application
and review the information concerning the product in the current product
catalog. The user, through its own analysis and testing, is solely
responsible for making the final selection of the system and components
and assuring that all performance, safety, and warning requirements of
the application are met.If the equipment is used in any manner that does
not conform to the instructions given in this user guide, then the
protection provided by the equipment may be impaired.
The information in this user guide, including any apparatus, methods, techniques, and concepts described herein,
are the proprietary property of Parker Hannifin or its licensors, and may not be copied disclosed, or used for any
purpose not expressly authorized by the owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we reserve the right to modify equipment
and user guides without prior notice. No part of this user guide may be reproduced in any form without the prior
consent of Parker Hannifin.
