Parameter Reference
D-66
AC30V series Variable Speed Drive
Motor Nameplate
Setup::Motor Control::Motor Nameplate
Parameters::Motor Control::Motor Nameplate
Only available if IM MOTOR selected in
Control Mode.
In this function you enter the details of the motor under control and any available motor nameplate information.
Refer to Induction Motor Data parameters which are determined by the Auto Tune feature for example the
Magnetising Current, Stator
Resistance,
Leakage Inductance, Mutual Inductance
and
Rotor time Constant
for model parameters.
Note
Do not attempt to control motors whose rated current is less than 25% of the drive rated current. Poor motor control or Autotune problems
may occur if you do.
PNO Parameter Descriptions
Rated Motor Current
Rated motor current on the name plate
Base Voltage
The rated motor voltage on the name plate
Base Frequency
The base motor frequency on the name plate
Motor Poles
Motor poles on the nameplate
ameplate Speed
Rated motor speed on the name plate
Motor Power
Motor power rating
Power Factor
Only under VHz Control
Motor power factor on the name plate
