Parker AC30V Series, Manual

Page: 207 / 337

D-10
Parameter Reference
AC30V series Variable Speed Drive
Control Mode
Advanced Setup::Motor::Control & Type::ControlMode
Parameters::Motor Control::Control Mode::Control Mode
The control mode block provides the means for selecting the type of motor and the desired method of controlling the motor.
PNO Parameter Descriptions
0511
Motor Type
Motor type selection parameter
Allows the user to select the type of motor.
Enumerated Value : Motor Type
0 : INDUCTION MOTOR
1 : PMAC (PERMANENT MAGNET) MOTOR
0512
Control Strategy
Select control strategy selection parameter.
Allows the user to select the method of controlling the motor.
Enumerated Value : Motor Type
0 : VOLTS HERTZ CONTROL
1 : VECTOR CONTROL
Functional Description
The motor selection is the first step in setting the control mode.
The selection of control strategy comes next, with the permitted settings as follows:
- Induction motors can be run in either volts hertz mode or vector mode
-
Permanent magnet motors can only be run in vector control mode