890SD Standalone Drive
5-45
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
6
7
E
Powering-up the Unit
1.
Apply the 3-phase supply to the 890SD Standalone Drive.
2.
Select LOCAL mode operation:
♦
The Keypad will display the Remote Setpoint parameter (%).
3.
You MUST carry out an Autotune
if you intend to use the drive in Sensorless Vector Fluxing Mode
or Closed-Loop Vector Mode - go to page 5-46. If you are using the drive in Volts/Hz Mode (Open-
Loop Drive) an Autotune is not necessary - go to page 5-51.
REMOTE
LOCAL
Hold the Stop key down until
the display spells
Release the key to display
the previous menu
for example,Local Setpoint
