manualshive.com logo in svg

Parker 700-00027-0, Manual

Share
Download
Parker 700-00027-0 Manual Download Page 11

11

Liquid tight cable outlet

Rubber gasket seal in lid recess.

Driver plug base to valve coil rubber 

gasket supplied ( loose )

M3 x 40mm mounting screw

If required, Apply ‘lithium 
grease’ under lid ( fill void ) 
and between driver plug 
base, gasket and valve coil 
connector.

Application Notes for Harsh Environments.

• Use care when re-assembling unit after adjustment and ensure that lid gasket is in place.

• DO NOT over tighten the central M3 x 40mm mounting screw.

• Ensure that flat rubber gasket ( supplied ) is fitted between valve coil and driver plug.

• For ‘high moisture’ applications apply ‘lithium grease’ between valve coil and driver plug base 
before final assembly and mounting screw tightening process.

• For total immersion applications, follow above step and additionally fill driver plug lid with ‘lithium 
grease’ after adjustment and before final assembly to form liquid proof seal around all potentiometers 
and units plug base / valve coil joint.

Block Diagram.

PWM 

F.E.T.

output 

stage

‘Dither’

( PWM ) 

frequency 

adjust.

I Min adjust

ECU PWM 

signal I/P

Internal

PSU

Ramp 

Generator

Current 

Feedback

PWM ‘ f ’

generator

Output to 
valve coil 

interface

I Max ( 20 Turn potentiometer )

+Vin

0Vin

ECU 0V

700-00027-0, DFC-3 Plug Top Driver Unit.

PWM

To V

Summary of Contents for 700-00027-0













Reviews:

No comments

Brands by name

Popular brands

Load more brands