404LXR Series Product Manual
Appendix B
– Internal Protection
47
Product Rating
All standard configurations will pass IP20 specifications with the following
exception:
•
The cable carrier is not covered by the specification.
All standard configurations, (less cable carrier), can be configured to pass IP30
specifications by utilizing the “IP ship kit” supplied with each unit as follows:
•
Using the supplied
aluminum foil disks
, cover all
counter-bored base mounting holes
that are
not covered by your mounting surface. The disks should be installed from the outside of the
unit. Depending on the travel length, some disks will not be used.
•
Using the supplied
aluminum foil disks
, plug all unused
carriage mounting holes
that are not
covered by the load or load plate.
•
Using the supplied
aluminum foil disks
, plug all
threaded base mounting holes
that are not
covered by your mounting surface. Depending on the travel length, some disks will not be
used.
