EN
| User Manual
Transportation, installation and storage
KA-MT 1-8/D3
13
Storing the dryer
If the dryer is to be stored for an extended period of time, the storage location must meet the
following conditions:
◊
The dryer must not be stored in the open air.
◊
The storage room must be dry.
◊
The storage room must be free from dust or the dryer must be covered by a protective
sheet.
◊
The storage room must have an ambient temperature of at least +1 °C (33,8 °F).
In order to store the dryer proceed as follows:
Take dryer out of operation as described on page
30
.
Ensure that the compressed air inlet valve installed by the owner, and the installed
compressed air outlet valve installed by the owner, are both closed, and that the dryer is
depressurised.
Disconnect dryer from the compressed air system.
Disconnect the dryer from the electrical power supply and all external lines.
Use fi lm material or similar to close the compressed air inlet apertures and compressed
air outlet apertures on the dryer in order to protect them against contamination.
If possible cover dryer with a protective sheet.
The dryer can now be stored for long periods.
Note:
If you wish to take the dryer back into service after an extended period of sto-
rage, please proceed as described for its fi rst commissioning and start-up (see
page 26).
Store drying agents
Do not store drying agents in the open air.
Protect drying agents against humidity.
