1 - Safety
Strada Evolution 2 - Transfer and Rapide - Installation manual
5 / 42
-
Directive 2004/108/EC
of the European Parliament and of the Council of 15
December 2004 on the approximation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive 89/336/EEC.
United States of America
This product is compliant with:
The National Electrical Code
The Americans with Disabilities Act (ADA)
The Federal Communication Commission (FCC) rules part 15
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: The manufacturer is not responsible for any radio or tv interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.
Electricity
•
All product-servicing operations require appropriate training.
•
Only adequately trained personnel may work on the mains power supply.
•
Protect personnel from electrical shocks with the help of appropriate electrical and earth
connections.
•
Always switch off the power before beginning some repairs, as instructed in this manual.
•
Make sure that the electrical parts are installed in accordance with national standards.
•
Keep the mains power supply disconnected throughout these operations. Protect the
electrical wires from the rain. Never work on products connected to the mains or the
telephone network during stormy weather.
•
While repairing a circuit breaker installed on a machine, the main circuit breaker located in
the technical unit must be switched off and marked with
maintenance information
so as to
protect the agent from electric shocks.
•
Isolate the mains power supply with the circuit breaker and switch off the low-voltage
power with the On/Off button on the main board.
•
Make sure that the earth cable is in good condition.
•
Follow the instructions relating to the earth connections of product components in order to
ensure compliance with EMC immunity and emissions standards.
•
Minimum and maximum diameter of mains power supply cables: 1.5 to 2.5 mm².
•
Ask for a signed certificate from the contractor.