![background image](http://html1.mh-extra.com/html/park-warehouse/zipcrank-685se275-4/zipcrank-685se275-4_installation_3695900003.webp)
3
7. Using either the
BA980EW Electric Wand
(H) with the
BA980 Electric Saddle & Wand Box Assembly
(I) or
the
BA975KS Key Switch
(J) raise rim to the official 10’ height, to the top of rim. If using the
BA980EW
Electric Wand
(H) insert the plug end into the socket of the
BA980 Electric Saddle & Wand Box
Assembly
(I) then twist until locked into place before turning the key to raise or lower the
Height Adjuster
Frame
(A). Cut apart
Height Adjuster Label
(C) at the perforations. Attach “Rim Height” Label to the
Height Adjuster Frame
(A) 2” above horizontal tube as shown. Align “10.0 FEET” label to “Rim Height”
label and attach to frame as shown. Adjust rim down to 9 1/2 feet, align “9.5 FEET” label to frame. Repeat
this process for the remaining height labels. See Figures 3 & 4.
8. Grease the slide assembly by wiping a light film on the grease point annually or as needed to insure
smooth adjustment. See Figure 4.
Figure 3
Summary of Contents for ZipCrank 685se275-4
Page 2: ...2 Figure 1 Figure 2...
Page 4: ...4 Figure 4...