Park Tool Co.
5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
3
Clamp Rotational Adjustment
The clamp can be rotated 360 degrees, allowing easy access to any component. To adjust the angle of the clamp:
A. Loosen handle on lock block assembly
(#4) in horizontal tube (#3).
B. Rotate 100-3D clamp to desired position.
C. Retighten handle of lock block assembly
(#4) to secure clamp.
A
B
C
Height Adjustment
The PRS-3M has three height adjustment positions. To adjust the height:
A. Remove any clamped component or part from repair stand.
Hold upright tube (#7) firmly and loosen handle of lock block
assembly (#5) in base support upright (#2).
B. Continue to hold upright tube (to prevent it from dropping) and
pull locking pin (#12) from upright tube (#7).
C. Raise or lower upright tube (#7)
D. Reinstall locking pin (#12) into desired height adjustment hole.
E. Retighten handle of lock block assembly (#5).
12
7
5
5
2
A
B
C
D
E
Notes
• For bolting the repair stand directly to the floor, use the Park Tool FP-2 Floor Plate (sold separately).
PRS-3M
Deluxe Single Arm Repair Stand
