Park Scale Models AT-17 Bobcat, Assembly Manual

Page: 21 / 35

44. Fit and glue the nacelle blocking rings NB1, NB2,
NB3 together. Each ring is made up of three
pieces; you will need two of each ring. Epoxy three
¼” magnets into NB1 where indicated, ensure the
polarities of the magnets are oriented in the same
direction.
45. Stack and glue NB1, NB2 and NB3 together and
then glue to former NF2.
46. Temporarily fit the nacelle to the wing and mark
where the former NF1 come in contact with the
leading edge.
47. Remove the nacelle from the wing and remove the
1/8” balsa leading edge where marked so that the
nacelle will sit flush against LE1. Refer to step #21
to identify LE1.
NB1
TEA
NB2 NB3
¼” magnets