Park & Garden LS5T-52HU, Manual

Page: 19 / 24

19
English
TROUBLE SHOOTING
PROBLEM PROBABLE CAUSE REMEDY SUGGESTED
Motor Stops to Start Overload Protection Device disengaged
to protect the log splitter from being
damaged Contact a qualified Electrician for opening
the Pushbutton Box to engage the
Overload Protection Device inside
Fails to split logs
Log is improperly positioned Refer to “ Log Splitter Operation” section
for perfect log loading.
The sizes or hardness of the log exceeds
the capacity of the machine Reduce the log sizes before splitting it on
the log splitter
Wedge cutting edge is blunt Refer to “ Sharpening Wedge “ section to
sharpen the cutting edge.
Oil leaks Locate leak(s) and contact the dealer
Unauthorized adjustment was made on
Max. Pressure Limiting Screw. Lower
max pressure rating was set. Contact the dealer.
The log pusher moves jerkily,
keeps unfamiliar noise or
vibrates a lot Lack of hydraulic oil and excessive air in
the hydraulic system. Check oil level for possible oil refilling.
Contact the dealer.
Oil leaks around cylinder ram
or from other points.
Air sealed in hydraulic system while
operating. Loosen Bleed Screw by 3 ~ 4 rotations
before operating the log splitter
Bleed Screw is not tightened before
moving the log splitter. Tighten the Bleed Screw up before
moving the log splitter.
Oil Drain Bolt with Dipstick is not tight. Tighten the Oil Drain Bolt with Dipstick.
Hydraulic Control Valve Assembly and / or
seal(s) worn Contact the dealer
RESPONSIBLE DISPOSAL
This symbol indicates that this product should
not be disposed of with general household
waste. This applies throughout the entire EU. In
order to prevent any harm to the environment
or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so
that the material can be disposed of in a responsible
manner. When recycling your product, take it to your local
collection facility or contact the place of purchase. They
will ensure that the product is disposed of in an
environmentally sound manner.
WARRANTY
Product has 1 year warranty valid from the date of
purchase. The warranty applies only to material or
fabrication errors. The warranty ceases to apply if the
operating instructions have not been followed or the
product has been exposed to abnormal load or operation.
All transport and dismantling costs are at the buyer’s
expense. In case of disputes, the Purchasing Act applies.