Using Your Humidifier
Add water
1. Lift the water tank and turn it upside down.
2. Remove the tank cap and fill the tank with purified water only.
3. Attach the tank cap and put the tank back onto the base securely.
FCC Compliance
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally
safe recycling. Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
Operations & Functions
Connect to a power source, the humidifier is in Standby mode.
Note:
Do not add water into the base or through the nozzle.
Do not add essential oil or medicinal tablets into the water tank.
Manufacturer: Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
www.parisrhone.co
Made In China
Rev_1.0
Light Ring
The light ring indicates the working status
of the humidifier.
White
Humidifier on
White Fade in-out -> White I -> White II
-> White III
Smart Mode -> Low Mist -> Medium Mist ->
High Mist
Flash Red
Low water protection
Water tank lifted up
Light OFF
Auto off if no operation in 40 seconds
Control Button
• Press to cycle through ON -> Smart Mode -> Low Mist -> Medium Mist ->
High Mist -> OFF.
• Hold for 2 seconds to turn off/on the tank light and night light (default: ON).
Smart Mode
• Press to turn on Smart Mode (light ring
fade in-out white).
• In this mode, the unit will adjust the mist
level automatically based on the
environmental humidity.
• Stop working: reaches 65% humidity.
• Restart working: below 60% humidity.
Tank Light
The water tank light indicates the
environmental humidity levels.
Orange
Purple
Blue
Low (<40%)
Medium
(40~65%)
Blue (>65%)
Specifications
Model PE-AH023
Operating Voltage 100-120V~50/60Hz
Rated Power 25W
Water Tank Capacity 4.0L/1.06Gal
Mist Output Min: 100ml/h
Medium: 200ml/h
Max: 300ml/h
1
2
2
3
Summary of Contents for PE-AH023
Page 1: ...150 200mm 128...
