After the Aerosol Head has been used
7 times, throw away (dispose of) and replace
with a new one during the cleaning process.
1
C.
Assembling Your Handset
Wash your hands with
soap and water, and
dry them well.
2
Insert the Blue Valve.
• Open the Handset by gently pulling up
on the tab of the Medication Reservoir.
• Insert the Blue Valve so that it rests
on top of the Aerosol Chamber with
the 2 valve flaps
facing down.
3
Insert the Aerosol Head.
• Grasp the Aerosol Head by the 2 flexible
plastic tabs on each side. Be sure the text
is facing toward you and is at the top of
the Aerosol Head.
• Squeeze the 2 flexible plastic tabs together
while inserting the Aerosol Head into the
Medication Reservoir.
• Close the Handset when you are done.
Do not touch the silver part of the
Aerosol Head at any time.
4
Attach the Mouthpiece to your Handset
with the Blue Flap facing up.
5
Finally, attach the Handset to the Controller.
A.
Attach the Connection Cord to the Handset.
a1.
Line up the bottom of the Connector
with the bottom of the Handset.
a2.
Push upward against the
Handset until you hear the
pieces snap together.
B.
Connect the Connection
Cord to the Controller.
Tab
3
Blue Valve
Aerosol
Head
2
B.
A.
“Snap”
a1.
a2.
