7.IR / mode switch
6.Sleep/Power
8.Red dot
9.Menu / Playback
10.OK/Photo/Recording
11.Zoom
±
/ WiFi
14.Eyepiece dioptric adjustment ring
12.Adapter
clip
13.Focusing knob
1
.
Connect the adapter with the end of eyepiece of the optics scope, make sure to get
a full image from the display of the unit, tighten the screws by a hex-nut wrench.
3.Adapter installation
—
4
—
Unpacking
This box contains:
Installation
Please use 3.7V Lithium rechargeable flat battery 18650.Remove battery
cap and make sure setting the positive polar towards to the direction inward.
Put the cap back and screw it until tight. ( Fail to do so may result in restarting!).
1.Battery installation
2.Adjustments
—
5
—
—
7
—
1 NV007S; 1 Micro USB cable;
2 Hex-nut wrenches; 1 Adapter;
Micro
SD
c
ard is not included. Please prepare a micro SD card (128G maximum)
for data storage. If
the
M
icro
S
D
c
ard is
bigger
t
han
16G
,
t
he
M
icro
S
D
c
ard
s
hould
b
e
f
ormatted
i
nside
the
unit
.
—
6
—
Instructions
1.
Turn On/Off
：
2.
Sleep / Wake-up mode
：
3 Spacer rings;
1 Electrical tape.
A simple test can be taken to check the functions of the device after
the installation of battery.
First, rotate and adjust the eyepiece dioptre adjustment ring until you see
the character icons on the screen (there's no need to see a clear image ).
Second, rotate the objective lens adjustment ring until you can see your target
clearly.
Third, connect the adapter with the optics scope by following instructions.
At last, adjust the focus ring of the optics scope to get a sharp view.
（
Two sizes of adapters are available and optional: 45mm and 48mm. The
adapter can be applied to the optics scope with 38-48mm diameter of
eyepiece.The spacer rings and electrical tape in the package can help to install
the adapter).
2.Make the unit clip-on with the adapter. The installation is finished after
hearing a sound of click.
3.Press and hold the adapter clip, twist the unit in a counter-clockwise
direction to take off the unit.
Turn on the device with a short press of Power button. Turn off the device
with a long press of Power button. Power indicator will keep light when the
device is turned on.
Enter into the sleep mode with a short press of Power/Sleep button
when the device is turned on.
Power indicator will keep light when the device is under the sleep mode.
