2
2
2
2
CONTENTS
Introduction
Applications
Functions and controls
Hazards & risks
Operation
Care and preventive maintenance
Service
Specifications
Trouble shooting
2-3
3
3
3
3
4
APPLICATIONS
Trench compaction
Earthworks
Road maintenance
Landscaping
Brick paving
Driveway toppings
FUNCTIONS AND CONTROLS
MOTOR
The rnotor is controlled by an ON/OFF switch or push button which
is mounted on the motor below the fuel tank.
The motor speed is controlled by a remote throttle lever which is
mounted on the machine handle.
Honda motors are fitted with an oil alert device which will stop the
motor or prevent starting when the crankcase oil level falls below a
safe level.
HAZARDS AND RISKS
! MECHANICAL HAZARDS
DO NOT operate the machine unless all protective guards are in
place. Ensure all warning labels are visible and understood.
KEEP hands and feet clear of rotating and moving parts as they will
cause injury if contacted.
ENSURE that the motor operation switch is in the OFF position and
the spark plug ignition lead is disconnected before removing the
guards or making adjustments.
ENSURE both the machine and the operator are stable by setting
up on level terrain and the machine will not tip over, slide or fall
while in operation or unattended.
DO NOT leave the machine in operation while it is unattended.
ENSURE that the walls of a trench are stable and will not collapse
due to the action of the vibration, prior to commencing compaction.
ENSURE that the area to be compacted does not contain any “live”
electrical cables, gas, water or communication services which may
be damaged by the action of the vibration.
EXERCISE CARE when operating unit. Exposure to vibration or
repetitive work actions may be harmful to hands and arms.
NEVER stand on the unit while it is operating.
DO NOT increase the governed no-load motor speed above 3,500
rpm. Any increase may result in personal injury and damage to the
machine.
BE CAREFUL not to come in contact with the muffler when the
engine is hot, since it can cause severe burns.
ENSURE that repairs to the motor and machine are carried out by
qualified COMPETENT personnel.
! FIRE & EXPLOSION HAZARDS
PETROL or diesel is extremely flammable and explosive under
certain conditions.
ENSURE that petrol or diesel is only stored in an approved storage
container away from source of ignition.
DO NOT refuel the motor while it is in operation or hot.
DO NOT refuel the motor in the vicinity of ignition source such as
sparks, a naked flame or a person smoking.
DO NOT over fill the fuel tank and avoid spilling petrol when
refuelling. Spilled petrol or petrol vapour may ignite. If spillage
occurs, ensure that the area is dry before starting the motor.
ENSURE that the fuel tank cap is securely fitted after refuelling.
Ensure fire extinguisher is readily available for use.
INTRODUCTION
General Safety Instructions for the Operation of
Power Equipment
The goal of Flextool is to produce power equipment that helps the
operator work safely and efficiently. The most important safety
device for this or any tool is the operator. Care and good judgement
are the best protection against injury. All possible hazards cannot
be covered in this manual, but we have tried to highlight some of
the important items. Operators should look for and obey Caution,
Warning and Danger labels placed on the equipment. Operators
should read and follow safety instructions packed with each product
to learn how each machine works. Even if you have previously used
similar equipment carefully check out each machine before you
use it, get the "feel" for it and know its capabilities, limitations,
potential hazards, how it operates, and how it stops.
DRIVE BELT
Tension of the drive belt is adjustable. Loosen the four nuts on
the bolts which secure the motor to the base plate, Adjust the set
screws which bear against the motor crankcase to achieve the
required belt tension. Ensure that the four nuts and the set screw
locknuts are tightened after adjustment.
! CHEMICAL HAZARDS
DO NOT operate or refuel a petrol or diesel motor in a confined area
without adequate ventilation.
CARBON MONOXIDE exhaust gases from internal combustion
motor driven units can cause death in confined spaces.
Check TLV (Threshold Limit Value) and oxygen content of area safe
for operation.
! NOISE HAZARDS
EXCESSIVE NOISE can lead to temporary or permanent loss of
hearing.
