6
USAGE TIPS
1.
Double tapping
2.
Scrolling function of digital pen
The U pen has the same function as a normal mouse for scrolling pages. Just press the first
button of the digital pen (same function as the mouse middle button) over the Parblo
screen.
3.
Using U pen without an ordinary mouse
You may install the Parblo and a mouse in your computer at the same time. However, only
one device is able to work at a time. You cannot use the mouse and U Pen at the same time.
MAPPING TO MULTIPLE MONITORS
If your computer is equipped with more than one monitor, your Parblo will map to the monitors
based upon how they are configured in the DISPLAY PROPERTIES control panel.
After you have correctly configured your computer for using it with multiple monitors, you
can then adjust your Parblo mapping by opening the Parblo panel and changing the
appropriate options.
This enables you to toggle the current Parblo mapping and screen cursor between the system
desktop or primary display and your other monitors.
Please refer to page 19.
→
Note: 1 . Under "extended display" view, you may use your pen cursor to navigate through both
Parblo and monitor display easily by pressing down on the top button of the pen for 2 seconds.
Vice versa, by pressing down the same button for another 2 seconds, your pen cursor will switch
back to navigating on only one display (this could be Parblo or your monitor depending on your
original display setting).
→
→ Note: 2 .Under the “Duplicate” display mode of the “Multiple Display” function, the display
resolution of your monitor must be set to the same resolution as your Parblo. Otherwise, your pen
cursor will be misplaced on the screen.
When you double tap with the digital pen (equivalent to a double click with a mouse), try
to quickly lift the pen tip higher up away from the Parblo screen before returning for the
second tap.
