SafeAir™ M-200 Pro Installation Guide
15
www.parazero.com
5.7
Inserting the parachute
Caution
During all installation stages, be sure –
That the safety pin remains in its proper place.
Not to connect the parachute cable to the SmartAir.
1
Hold the folded parachute,
remove the rubber bands while applying pressure to the
upper yellow cap and the bottom red base.
2
Insert the folded parachute into the Canister so the red base inserts first. Push the
parachute in all the way. Remove the yellow cap and Squeeze the parachute itself into
the canister while removing the paper container out (keep the paper container in a safe
place for repack purposes)
3
Do not remove your hand from the top of
the parachute. With your other hand,
connect the main strap to the bridles and
secure the carabiner. Fold the main strap
on top of the parachute so that the bridles
leave the canister, at one point on the
opposite side to the SAP, towards the front
of the drone and place the yellow cap.
Make sure the cap is secured and that the
parachute is not sticking out of the cap.
