manualshive.com logo in svg

Paravan PR 40, User Manual

Share
Download
Paravan PR 40 User Manual Download Page 126

Gener

al

Information

Pr

epar
e

Oper
ate

Help

Technology

Troubleshooting

126

18. 

Troubleshooting

18.1 

Status indicator on the control panel

Error message

Meaning

Centre joystick / Joystick 

zentrieren

The most common cause of this error is that the joystick is not centred when the 

control system is switched on. “Joystick off-centre” will appear on the display for five 

seconds. If the joystick is not released within this time, an error will be generated.

Please ensure that the joystick is centred and then switch the control system on. When 

switching on the control system, make sure that you do not touch the joystick button 

with your hand.

Low battery / Batteriestand 

niedrig

This message appears when the control system detects that the battery voltage has 

dropped below 16 V.

Check the state of the batteries and the connections in the control system.

High battery / Hohe Batteriespannung 

This message appears when the control system detects that the battery voltage has 

risen above 35 V. The most common reason for this is that you have overcharged the 

battery or there is a bad connection between the control system and the batteries.

Check the state of the batteries and the connections in the control system.

System lock active / Sperre 

aktiv

This message appears when one of the blocking inputs is active and locked.

Switch the control system off and on again. This will remove the system lock and may 

get rid of the error.

Check all cables and switches on the corresponding blocks.

Summary of Contents for PR 40





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands