Congratulations and thank you for your purchase of this precision Parasound audio component.
The Parasound Zamp v.3 Zone Amplifier is the third generation of one of the world’s most
popular and proven audio amplifiers. It has been designed for a wide variety of applications,
including multi-room, multi-zone installations, desktop audio, PC-Mac audio, bedroom or den
systems. The versatility of the Zamp v.3 allows many connection and configuration options,
so please be sure to read this manual thoroughly before you begin installation.
Unpacking
Carefully unpack your Zamp v.3 and these accessories:
•
Detachable AC power cord
•
DC trigger wire with a mono 2.5 mm sub-mini plug at each end
Note:
This is for use with many Parasound preamplifiers
•
DC trigger wire with a 3.5 mm (
1
⁄
8
"
) mini plug at one end and mono 2.5mm sub-mini plug at the other
Note:
This is for use with many other brands of preamplifiers,controllers and AV receivers and
the older Parasound models C 1, C 2, 7100.
Please inspect the unit now and contact your Parasound Dealer promptly if you see evidence
of shipping damage. Save the carton and packing inserts in case you move or in the event you
need to ship your amplifier for repair. Before you proceed, locate the five digit serial number on
the rear panel or underside of the unit and record it here for future reference:
INTRODUCTION
2
OWNERSHIP REFERENCE INFORMATION
Parasound Serial Number:
Date of Purchase:
/ /
Name of Dealer:
Dealer Street Address:
Dealer Phone:
( ) -
Summary of Contents for Zamp v.3
Page 1: ......
