background image

INTRODUCTION

2

Congratulations and thank you for your purchase of this precision Parasound audio component.
The Parasound Model 2125 is the latest generation of popular and proven audio power amplifi-
ers dating back to 1981. It has been designed for a wide variety of applications, establishing 
a new standard for audio performance, user-friendliness and utility in custom installations.
The versatility of the Model 2125 allows many connection and configuration options, so please 
be sure to read this manual thoroughly before you begin installation.

Unpacking

Carefully unpack your Model 2125 and these accessories:

  Detachable AC power cord

  Trigger wire with a 2.5 mm sub-mini plug at both ends

  Trigger wire adapter for a 3.5mm mini jack

Please inspect the unit now and contact your Parasound Dealer promptly if you see evidence 
of shipping damage. Save the carton and packing inserts in case you move or in the event you 
need to ship your amplifier for repair. Before you proceed, locate the serial number on the rear 
panel or underside of the unit and record it here for future reference:

OWNERSHIP REFERENCE INFORMATION

Parasound Serial Number:

Date of Purchase:

/      /

Name of Dealer:

Dealer Street Address:

Dealer Phone:

(      )      -

Summary of Contents for NewClassic Model 2125

















Reviews: