manualshive.com logo in svg

Parasound Model D 200, Owner'S Manual

Share
Download
Parasound Model D 200 Owner'S Manual Download Page 13

13

POWER UP YOUR D 200

After your D 200 is connected to the rest of your home theater system you are ready for its 
shake-down cruise. Select the TV’s Input for its Input jacks which you connected to the  
D 200’s Video Out jacks. 
-  Press the D 200’s rear panel 

Master AC Power switch

 to its 

On

 position. You should now  

notice a very faint red glow behind its Power button.

-  Press the Power button on the front panel to turn the D 200 on.
-  You can now press the 

LOAD button

 and insert a DVD into the exposed loading tray.  

A few seconds after you press the 

PLAY button

 you should see and hear the opening 

screens of the movie. 

-  Once you are confident that the D 200 is properly connected to the rest of your system you  

may want to adjust some of the settings in the setup menu. The next section of this manual 
is dedicated to the setup menu.

Note:

 If you don’t see/hear anything now, please recheck your connections and make sure your 

TV is on. Check that the TV and surround controller (or AV receiver) selected inputs are the same 
as the input jacks which are connected to the D 200.

Summary of Contents for Model D 200





































Reviews:

No comments

Brands by name

Popular brands

Load more brands