The
12V Trigger Output
jack generates its own +12 Vdc voltage whenever the P 3 is turned on
so it can trigger other components such as a Parasound power amplifier. This output will
provide up to 200 mA of current to trigger an external component.
What You’ll Need:
• A second trigger cable with 2.5 mm sub-mini plugs (provided)
• A component that can be triggered with an ex9 Vdc to
+12 Vdc trigger voltage
Before Connecting
Remove power to all the components in your audio system.
To Connect
Connect one end of this cable to the
12V Trigger Output
jack on the P 3.
Connect the other end to the component that you want to trigger.
TRIGGERING ON ANOTHER COMPONENT FROM THE P 3’S
TRIGGER OUTPUT JACK
13
1
2
2.5 mm sub-mini plug
YOU SHOULD KNOW
If the component you want your P 3 to control doesn't have a 2.5 mm trigger input jack, you.,
you can cut off one plug and terminate the end of the wire. The lead with the red stripe is
positive and the lead without a stripe is negative.
C A U T I O N
Input
2
1
TRIGGERED COMPONENT
