background image

4

INTRODUCTION

Thank You for Choosing Parasound

Your new Parasound Halo JC 3+ Phono Preamplifier is the pinnacle of analog audio technology
and value engineering. It is legendary designer John Curl’s latest phono preamplifier design,
continuing his reputation for designing legendary phono preamplifiers that date back to the 1970s.

We are proud to offer you this exceptionally versatile audio component, confident that it will bring
you many years of enjoyment and dependability.

We appreciate you taking the time to read these instructions and thank you for selecting
Parasound. For updates and corrections to this manual, we invite you to check our web site,

www.parasound.com

Enjoy.

The Parasound Staff

Keeping Records for Future Reference

Record the serial number located on the back panel or bottom of your JC 3+ in the space below.
Also note your Parasound Dealer’s name and telephone number. Your purchase receipt/bill of
sale is required to determine if your JC 3+ is eligible for Parasound warranty service. We
recommend that you make an extra copy of your original purchase receipt/bill of sale and store it
inside the JC 3+’s carton.

Parasound JC 3+ Phono Preamplifier Serial #:
__________________________________________________
Parasound Dealer:
________________________________________________________________
Parasound Dealer Phone Number:
__________________________________________________________________
Date of Purchase:
________________________________________________________________

Important Warranty information

There is no Parasound warranty for this unit if it was not purchased from an Authorized
Parasound Dealer.

Investigate warranty coverage statements made by an

unauthorized

dealer

very carefully, as you will need to depend entirely upon your dealer, and NOT upon Parasound.
Unauthorized dealers lack the capability to make repairs or arrange for repairs of Parasound
equipment. A list of Authorized Parasound Dealers and detailed warranty information is available
at

www.parasound.com

or you can call

(415) - 397- 7100

between 8:30 am and 4 pm Pacific

time.
A missing or altered serial number could indicate that this unit was re-sold by an unauthorized
dealer or is stolen merchandise. If this unit is missing its serial number or the serial number has
been altered, you should return it to your dealer immediately for a full refund.

Summary of Contents for Halo JC 3+















Reviews: