Left and Right Unbalanced Inputs
Use these inputs if your preamplifier or surround controller doesn’t have balanced
output connectors or if you simply prefer to use unbalanced connections.
What You’ll Need:
• One standard pair of shielded interconnect cables with
RCA plugs
• A source component with RCA output jacks
Before Connecting
Leave the AC cord on the A 23 disconnected until you have made all other connections
to prevent any surprise burst of sound.
Make sure that all your cables are long enough so they are not strained or stretched
once they are connected.
Make sure the
Balanced-Unbalanced
switch on the A 23 is in its
Unbalanced
(down) position.
To Connect
Plug one end of the cable into the
Unbalanced Right Channel Input
jack on the A 23.
Plug the other end of this cable into the unbalanced right channel output jack on your
preamplifier (or a channel from your surround controller).
Repeat steps 1 and 2 for the left channel.
CONNECTING A PREAMPLIFIER OR SURROUND CONTROLLER
TO THE UNBALANCED INPUTS ON THE A 23
3
3
1
2
4
Right
Left
COMPONENTS
SURROUND
SOUND
CONTROLLER
PREAMP
OUTPUTS
C A U T I O N
or
1
2
RCA Plugs
Right
Left
3
&
4
