6
Introduction
Congratulations on the purchase of this precision audio component and thank you for your
selection of Parasound. The Parasound CSE 6.1 was designed to augment 5.1 channel surround
controllers or receivers to create “6.1” effects and filtering for a rear channel subwoofer.
The CSE 6.1 is unique in its design and operation, so please be sure to thoroughly review
this manual before you begin installation.
The CSE 6.1 requires one or two additional power amplifier channels to drive on or two
Rear Center Surround speakers.
Speakers for your Rear Center Surround Channel
You may use one or two rear center surround speakers. If your room isn’t very wide, a
single speaker will create more convincing rear surround effects than two speakers. You
should select a speaker whose sonic characteristics are as close as possible to your left and
right surround speakers.
Unpacking
Carefully unpack your CSE 6.1, the enclosed remote control handset and AC power adapter.
Be sure to inspect the unit for any possible shipping damage. If you notice any, contact your
Parasound Dealer immediately. Save the carton and all of the packing materials in case you
ever need to ship the CSE 6.1 for repair.
Installation and Rack Mounting
Locate your CSE 6.1 on a sturdy surface and out of direct sunlight that may interfere with its
remote control sensor. Place your CSE 6.1 away equipment such as computers or tuners that
could cause interference.
Its panel dimensions are one rack space high (1 3/4” or 44 mm) by one-half rack width
(9 1/2" or 242 mm). It will fit into a standard 19" wide equipment rack when mounted side-
by-side with other Parasound half-width components. Optional parts are available from
Parasound to rack mount the CSE 6.1 by itself or alongside another Parasound half width
unit.
Before you proceed, locate the serial number on the rear panel and record it here for future
reference:
Serial #____________________
Date of Purchase___________________
Parasound Dealer ____________________ Phone Number____________________