37
Front Panel Operation
Selecting Preset Radio Stations from the Front Panel
1. Activate the tuner by pressing the Tuner button on the front panel.
2. Press the Preset button to advance to the next desired preset. If there is no broadcast
frequency stored into a preset number, that number will be skipped.
Automatic Tuning from the Front Panel
1. Activate the tuner in the automatic tuning mode by pressing the Tuner button on the
front panel and the Man button the remote control until
AUTO
appears in the tuner display.
2. Search through the previous or next broadcast frequency by pressing the Tuning
f
or
e
buttons to select the desired station.
Remote Control Operation
Selecting Preset Radio Stations from the Remote Control
Option 1
1. Activate the tuner by pressing the Tuner button on the remote control.
2. Press the Preset
f
or
e
button to scroll up or down through preset stations.
Option 2
1. Press the Tuner button on the remote control to activate the tuner.
2. Press any of the 10 preset numbers to select the radio station preset to that number.
3. To access preset numbers above
10,
press the numerical button down again to add 10
and again to add another 10. For example, to access preset
15
, press the numerical button
number 5 twice and
P15
will be selected.
Manual Tuning from the Remote Control
1. Press the Tuner button on the remote control to activate the tuner.
2. Press the Man button.
3. Press the Tune
f
or
e
buttons to tune to the desired frequency. In the manual tuning
mode, these buttons select FM frequencies in 100 kHz steps (50 kHz steps for export
units) and AM frequencies in 10 kHz steps (9 kHz for export units)
Temporary Level Adjustment Using the Trim Function
After initial calibration, the Trim button on the remote control allows you to make temporary
channel volume adjustments. Since there is no reason to trim the LS and RS channels
separately after calibration, their adjustment is combined for your convenience.
To Trim Individual Channel Levels
1. Press the Display button twice to display the level indicators in the on-screen display.
5. Press the Trim button on the remote control. F/L flashes in the on-screen display to
indicate that the front left channel is ready to adjust.
6. Each time you press the Trim button, it advances to the next channel in the order of F/L,
C, F/R, L/S, R/S, and S
UB
.
7. Press Volume
g
or
h
buttons to adjust that channel to the desired level. You can adjust
each channel level from 10 dB to +10 dB. After the Sub channel level has been trimmed,
the next time you press the Trim button, it will end the trim function.