The VCO signal are also affected by the LFO, Track and Warp controls.
More about that later...
SUB
– This controls how much octave down you add to the signal.
OctD switch
– Toggles between one or two octaves down (down position –
two octaves down, up position – one octave down).
These controls are independent from the mix control, so the octave down can
be added to both the fuzz and the VCO signal.
2. This setting shows a synthy sounds with one octave down, and two
octaves up.
FILTER
– This control the cutoff of the resonant filter. Turn it down just alittle
to remove the fizz from the treble, or turn it down completely for a huge treble
cut. In the middle position you will hear a strong resonant peak.
