PARASIT STUDIO 0415 GUITAR SYNTH, Quick Start Manual

Page: 4 / 8

Bill Of Materials (BOM)
•
** = see page two!
•
The trimmer sets the input sensitivity, from very sensitive and
noisy when just touching the strings to more gated and
controlled. Adjust to suite your guitar output and taste.
•
* = Current limiting resistor for the LED. This needs to be
wired offboard or on a 3PDT board. Choose the appropriate
value for the type of LED you are using. A 4.7K resistor is
usually a good value for a regular diffused LED and 15K
resistor for a superbright clear LED.
•
Other things that are not included in the BOM but good to
have: enclosure, input and output jacks, DC jack, 3PDT switch,
LED bezel and knobs.
Wiring
For more info on how to wire up the stompswitch, jacks ect, please
visit the Parasit Studio website and download the PDF called
”offboard wiring”. You can find it here:
http://www.parasitstudio.se/build-docs.html
Resistors R16 10K IC's
R1 1M R17 10K IC1 CD4069UBE
R2 1M R18 47K IC2 CD4015BE
R3 1M R19 47K IC3 CD4046BE
R4 1M R20 100K
R5 10K Capacitors Potentiometers
R6 10K C1 100nF MIX B50K
R7 10K C2 4.7nF VOLUME A100K
R8 4.7K C3 100nF TRIMPOT 200K
R9 100K C4 33nF Switches
R10 100K C5 470pF OctDown DPDT on/off/on
R11 47K C6 100nF OctUp SPDT on/off/on
R12 47K C7 - Diodes
R13 10K** C8 2.2uF D1 1N4001
R14 10K** C9 100uF on/off LED x1
R15 10K** C10 2.2nF + 1x CLR*