PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package
contents list and hardware contents as listed on page 5 of this manual. If any part is missing or damaged,
do not attempt to assemble this product. Contact customer service for replacement parts.
ESTIMATED ASSEMBLY TIME: 60 minutes
Tools Required for Assembly (NOT included):
Phillips screwdriver w/medium blade
Leak Detection Solution
Adjustable wrench (2) (
Note:
10mm wrench or socket should fit M6 bolt; 13mm wrench or socket should fit M8
bolt.)
NOTE:
This heater has an Electronic Ignition and will require installation of 1 – AAA battery. The battery should be installed
by unscrewing the RED IGNITER BUTTON.
6
TOOLS AND ACCESSORIES
are optional when consumers want to install
the heater on the ground w/o wheel kits
X3
B.
A.
The grounding kits as shown on the drawings
Before assembling heater
，
install
Wheel set first
