OPERATIONS
10
FOR YOUR SAFETY
Be careful when attempting to manually
ignite this heater. Holding in the control
know for more than 10 seconds before
igniting the gas will cause a ball of flame
upon ignition.
FOR YOUR SAFETY
Heater will be hot after use. Handle with
extreme care.
When heater is ON:
Emitter screen will become bright red due to intense heat. The color is more visible at
night. Burner will display tongues of blue and yellow flame. These flames should not be
yellow or produce thick black smoke, indicating an obstruction of airflow through the
burners. The flame should be blue with straight yellow tops. If excessive yellow flame is
detected, turn off heater and consult "Troubleshooting" on page 11.
TO TURN off THE HEATER
A. Turn the variable control knob to LO position.
B. Turn the variable control knob to PILOT position.
C. Then press lightly and turn the variable control knob to OFF position.
D. Turn off the valve on the gas supply cylinder to shut down the heater completely.
