MDX DEBRIS REMOVAL SYSTEM INSTALLATION
2
WITH CANISTER
WITHOUT CANISTER
Vacuum Breaker Method 1: (Recommended for best debris removal performance.)
SDX
2nd SUCTION OUTLET
MDX
2 1/2”
2 1/2”
2”
2”
DEBRIS CANISTER
VACUUM BREAKER
(VENT TO AIR)
WATERLINE
5 FT. MIN.
5 1/2 FT. MAX.
SDX
2nd SUCTION OUTLET
MDX
2 1/2”
2”
DEBRIS CANISTER
SDX
VACUUM BREAKER
2”
2 1/2”
SDX
2nd SUCTION OUTLET
MDX
2 1/2”
2 1/2”
2”
VACUUM BREAKER
(VENT TO AIR)
5 FT. MIN.
5 1/2 FT. MAX.
WATERLINE
SDX
2nd SUCTION OUTLET
MDX
2 1/2”
SDX
VACUUM BREAKER
2”
2 1/2”
Vacuum Breaker Method 2:
SUMP INSTALLATION TO SHELL
1.
Apply sealing compound to top surface of MDX
sump flange.
2.
From outside of pool shell, align sump with screw
holes in mounting ring and sweep ninety pointing to
back wall of pool shell.
3.
Install (6) 12" x 1" flat head screws every other hole,
starting one off of hole aligned with tab.
(Fig. 1)
4.
From inside of pool shell, align seal ring with tab in
sump and press into place.
5.
Secure seal ring and sump together with six (6) 12"
x 1 1/2" flathead screws.
6.
Secure 2nd Suction Outlet fitting through sidewall in
desired locations.
7.
Make plumbing connection between 2nd Suction
Outlet and 2½" outlet on bottom of MDX Sump.
Pipe must be equal to circulation line.
FIBERGLASS SHELL
Fig. 1
Tab
