OPERATING INSTRUCTIONS
WARNING
e
LIGHTING
NOTE:
For initial start or after any cylinder
change, hold the control knob in for 2
minutes to purge air from all gas lines
before proceeding.
WHEN HEATER IS ON:
o
RE-LIGHTING:
Note:
For your safety, the control
knob cannot be turned OFF
control knob and then rotating
to OFF.
PUSH &
HOLD
PUSH IN
TURN
PUSHING
IN BUTTON
WHILE
4
smoke and
from the burning of oils used in the manufacturing will
appear. Both smoke and
will dissipate after approximately 30
minutes. The heater should NOT produce thick black smoke.
If you experience any ignition problems, please consult
“Troubleshooting” on page 1 .
Caution:
use. Smoke and
from the burning of oils used in the manufacturing will appear.
Both smoke and
will dissipate after approximately 30 minutes.
The heater should NOT produce thick black smoke.
+
_
This heater has an electronic ignition that requires the installation of an AAA battery (not included).
The battery must be installed by unsrewing the IGNITER BUTTON.
Summary of Contents for KLD7002S
Page 3: ...WARNING ...
Page 10: ...OPERATING INSTRUCTIONS r ...