Page 18
08.16.16
Multi-functional Operating with Remote Control
Turning ON/OFF the appliance:
1.
Ensure steps 1-3 in the “Main Power Switch” procedure are first followed.
2.
Press the “ ” remote button to turn on both flame and ember bed LEDs.
3.
Press the “ ” button again to turn off both flame and ember bed LEDS.
4. Verify the lights are shut off.
5. Turn off the main power swtich.
6. Unplug the power cord.
Note: The LEDs are at the brightest when the heating element is shut off. The
power swtich on the appliance must be turned on for the remote control to operate.
Changing the temperature:
1. Ensure steps 1-2 in “Turning ON/OFF the appliance” are previously followed.
2. Press the “ ” button to turn on the heat element to HIGH temperature at
1500W.
3. Press the “ ” button again to decrease the temperature to LOW temperature
at 750W.
4. Press the “ ” button multiple times to set ambient temperature to 18°C,
19°C, 20°C, 21°C, 22°C, 23°C, 24°C, 25°C, 26°C, 27°C, 28°C, ON or OFF. The
number will appear on touch panel display.
Note: Pressing the
“ ”
or
“ ”
a second time turns off the heating element.
Changing LED options:
1. Ensure steps 1-2 or 1-3 in “Turning ON/OFF the appliance” are previously
followed.
2.
Press the “ ” button to turn on or off the flame and ember bed LEDs.
3. Press the “ ” button multiple times to cycle through 3 different brightness levels and OFF for the yellow
flame LEDs.
4. Press the “ ” button multiple times to cycle through 3 different brightness levels and OFF for the blue
flame LEDs.
5. Press the “ ” button multiple times to cycle through 3 different brightness levels and OFF for the pink
flame LEDs.
6. Press the “ ” button multiple times to set operating duration to 30min, 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h, or off.
7. Press the “ ” button multiple times to cycle the back LED lights through red, yellow, blue, red/blue, red/
yellow, yellow/blue, red/yellow/blue, fade, or OFF.
Note: Steps 2-7 can be done independently.