If you have any questions regarding this product, please contact customer service at
or 1-800-561-5550, 7am - 4pm, PST, Monday - Friday.
HARDWARE CONTENTS
3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
Solid fuels shall not be burned in this appliance.
the product.
DANGER
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the appliance and
immediately call you gas supplier or fire department.
DANGER
Failure to comply with the precautions and instructions
provided with this fire pit can result in death, serious
bodily injury and property loss or damage from
hazards of fire, explosion, burn, asphyxiation, and/or
carbon monoxide poisoning. Only persons who can
understand and follow the instructions should use or
service this fire pit.
This appliance has been tested to and complies with the
The installation must conform to local codes or in
the absence of local codes to the National Fuel Gas Code, ANSIZ223.1. This manual contains important
information about the assembly, operation and maintenance of this fire pit. General safety information
is presented in these first few pages and is also located throughout the manual. Keep this manual for
future reference and to educate new users of this product. This manual should be read in conjunction
with the labeling on the product. Safety precautions are essential when any mechanical or propane
fueled equipment is involved. These precautions are necessary when using, storing, and servicing.
Using this equipment with the respect and caution demanded will reduce the possibilities of personal
injury or property damage. The following symbols shown below are used extensively throughout this
manual. Always heed these precautions, as they are essential when using any mechanical or fueled
equipment.
I
J
Bolt(8*40mm)
Nut(M8)
Washer
Spring washer
Qty. 4
Bolt (6*25mm)
Washer
Qty. 8
L
K
Wrench
Qty 1
M
Allen wrench
Qt
Qt
y
y.
1
1
Screwdriver
H
Bolt (8*35mm)
Washer
Qty. 4
ANSI Z21.97-2014, CSA STD 2.41-2014
Outdoor Decorative Gas Appliances.
Spring washer
