05.28.19
Operating by Remote Control
Page 10
This appliance can be activated only by the remote control once the
appliance is plugged into a socket and the power switch 0/I turned on. The
main switch is located
on
the right of the air outlet
.
1.
When using remote control, always point it at the fireplace, and keep no
further than 6 metres away.
2. Press the button. The flame, ember and top light will turn on while
the heater remains off. Press it again and all functions will turn off. If you
want to only control the flame and ember, press the
button.
3. The
button controls the flame and ember. Press it to turn
off the flame and ember if it is on.
4. The
BLUE
button controls the flame and ember. Press it to turn
off the flame and ember if it is on.
The
RED
5
.
Flame buttons control the brightness of yellow flame
intensity. There are 5 settings to cycle through.
6
.
To increase the ember brightness press the
(+) button. Each
press will increase in brightness until the maximum level is reached.
Pressing the ember button after maximum brightness has no effect.
7.
To decrease the ember brightness press the
(-) button, each
press will decrease brightness until the light is off.
8.
Press the
button to activate the 1500W heater. Press
again to
turn off the heater
button to activate the 750W heater. Press
again to turn heater off.
9. Press the
11
.
The
12.
The
12. There is no timer function for this model. The Button has no effect.
buttons
change the colour of
the
top
light,
8
total
settings.
Notice:This remote control must remain within 6 metres of the
fireplace and not too far off to either side to be effective.
11
. Press the
button to automatically control the room temperature between 22-25 C.
The heating function will shut off when room reaches 25C , and will automatically
heat when the when the temperature reaches 22C . Press the to stop heating
the heating function.