6
Controls / Operation
after reading safety instructions and this entire manual, be certain that the controls are in the off position.
Main Power switch:
The Main Power switch is located on the bottom of the unit. The
“I” indicated On and “O” indicated OFF. Push the switch to “I” to
turn on the unit and flame effect. The red leD indicator will be turned on
You have the following controls:
1.
Power On/OFF: Power to the unit
2.
Flame brightness controls: allows you to adjust the flame to suit your mood.
Press + to increase flame brightness and press - to decrease flame brightness.
3.
low Heat:750 watts
4.
High heat:1500 watts
Please note: The heater touch pad control must be touched 2 times to achieve high heat.
5.
Heater Timer: (see details below under remote control)
remote Control
1. Heater Timer: allows you to leave your heater
On while you sleep with an automatic timer for
shut off. You can set your heater to be on for
1/2 hour increments starting at a 1/2 hour up to
Maximum of 7-1/2 hours-press once for each 1/2
hour increment. after you reach 7-1/2 hours
the next press will shut off the feature
2. Flame brightness controls: allows you to
adjust the flame to suit your mood. Press + to increase flame
brightness and press - to decrease flame brightness.
3. Power On/OFF: Power to the unit
4. Heather Control: Press once for low heat, and twice for high heat.
Cleaning
Turn heater OFF and unplug from outlet. Use a vacuum or duster to keep heat and vent area clean
from dust and dirt. The exterior of the stove should be cleaned with a damp cloth or duster. Do not
use abrasive cleaners, liquid sprays, or any other cleaner that may scratch the surface.
